Smartcret
Smart Primer ABS: Microcement primer for absorbent surfaces
Smart Primer ABS: Microcement primer for absorbent surfaces
Smart Primer ABS is a water-based acrylic primer for microcement. The best ally for preparing the adhesion of surfaces like plasterboard, plaster, or mortar.
With a roller in hand, it will be ready in less than 30 minutes.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Description of Smart Primer ABS: Microcement primer for absorbent surfaces
Smart Primer ABS primer is a perfect adhesion promoter for plasterboard, plaster, mortar, concrete, etc. This primer, available in convenient 0.5 L, 1 L, and 2 L containers, facilitates the bond between the substrate and microcement.
Likewise, Smart Primer ABS takes care of unifying the absorption across the entire support.
The application of Smart Primer ABS could not be simpler. You only need a microfiber roller. In just 30 minutes, you'll be done. Dry and ready for the next step!
Additional information
Additional information on Smart Primer ABS: Microcement primer for absorbent surfaces
All additional technical information about Smart Primer ABS and its application:
- Nature: Water-based acrylic emulsion
- pH: 7-9
- Density: 1,02±0,05 g/cm3
- VOC: <5 g/L
- Touch dry: 30 min
- Application temperature: From 5ºC to 30ºC
- Consumption : 8-12 m2/L
Properties
Benefits of Smart Primer ABS: Microcement primer for absorbent surfaces
- Primer for absorbent surfaces such as plasterboard or plaster.
- The microcement primer Smart Primer ABS is ready-to-use.
- Due to its water-based composition, this product is non-flammable.
Application
Application of Smart Primer ABS: Microcement primer for absorbent surfaces
- Before applying the primer, the substrate must be dry, clean, and firm, free of grease or oils.
- Apply one layer of Smart Primer ABS with a brush or microfiber roller on the absorbent surface.
- Wait 30 minutes for the primer to dry properly.
- 24 hours later, you can start with the first layer of our ready-to-use microcement Smart Base.