Smartcover Tiles Guide: What Tile Paint Is and Its Benefits
Renew your tiles without renovation works with Smartcover Tiles: water-based tile paint, no primer needed, quick-drying and low satin finish for kitchens and bathrooms.
Smartcover Tiles tile paint: what it is and why choose it
Smartcover Tiles is a water-based tile paint, ready to use, designed to transform kitchens and bathrooms without removing the tiling. It is applied in 2 coats leaving 8 hours between coats, dries to the touch in ≈ 1 hour, and reaches full cure in 7 days. Its finish is low satin and it is available in 11 colours.
It adheres directly to tiles, stoneware, mosaic and porcelain, without primer, allowing fast and clean renovations.
Technical specifications
| Field | Value |
|---|---|
| Type | Acrylic water-based paint, ready to use. |
| Finish | Low satin. |
| Colours | 11 colours. |
| Number of coats | 2 (3rd possible if needed). |
| Touch dry | ≈ 1 hour. |
| Between coats | 8 hours. |
| Full cure | ≈ 7 days. |
| Coverage | ≈ 0.15 L/m² (two coats). |
| Application | Velourex roller, microfiber roller or brush. |
| Resistance | Good resistance to water and condensation; UV stable. |
Key benefits
- No primer needed: apply directly on tiles.
- Quick-drying and easy to apply, ideal for DIY renovations.
- Low satin decorative finish.
- Resists condensation in kitchens and bathrooms.
- Available in 11 interior colours.
Smartcover Tiles vs. conventional wall paint
Generic wall paint does not provide the same adhesion or resistance on tiles. Smartcover Tiles is specially formulated for glazed ceramic and mosaic.
Smartcover Tiles vs. epoxy
Epoxy paints usually require mixing and complex application times. Smartcover Tiles focuses on ease of use and aesthetics without compromising resistance.
Colours and finishes
Smartcover Tiles is available in 11 colours with a low satin finish, specially designed for kitchens and bathrooms.
How to apply Smartcover Tiles
- Cleaning: remove dust, grease and residues. Rinse and let dry.
- Protection: mask areas not to be painted.
- First coat: apply with velourex roller or brush. Touch dry ≈ 1 hour.
- Second coat: after 8 hours, apply the second coat. A third one if needed.
- Curing: allow 7 days before heavy use or frequent water exposure.
Consumption calculator
Enter the m². Calculation based on average consumption 0.15 L/m² (two coats).
Frequently asked questions
Do I need a primer?
No, Smartcover Tiles is applied directly on clean and dry tiles.
Is it suitable for shower areas?
Yes, as long as curing times are respected and it is protected with a suitable sealer.
How do I clean the painted surface?
With a damp cloth and neutral soap, avoiding abrasive products.
Transform your kitchen or bathroom with Smartcover Tiles, the ready-to-use tile paint that renovates without works.