Microcement primer with aggregate Smart Primer Grip 2kg

Data sheet

See Smart Primer Grip Technical Data Sheet

Benefits of microcement primer Smart Primer Grip 2Kg for non-absorbent surfaces

• Smart Primer Grip creates a rough surface for excellent adhesion on smooth or low absorption substrates.
• This microcement primer comes in a ready-to-use composition.
• The microcement primer for non-absorbent surfaces can be used both indoors and outdoors.

Application of microcement primer on non-absorbent surfaces Smart Primer Grip 2Kg

1. 1. Before applying Smart Primer Grip microcement primer for non-absorbent surfaces, the substrate must be dry, clean, firm and free of grease or oil.
2. Shake the container or stir with a spatula and apply with a brush or roller a coat of Smart Primer Grip primer for non-absorbent surfaces on the material to be coated.
3. Wait between 2 and 4 hours for the Smart Primer Grip primer for non-absorbent surfaces to dry properly before applying the microcement.

Additional information about Smart Primer Grip 2Kg microcement primer for non-absorbent surfaces

All additional technical information about Smart Primer Grip microcement primer for non-absorbent surfaces and its application:

• Polymer type: Acrylic
• Appearance: Milky granular liquid
• pH: Between 7,5 and 9
• Bulk density: 1,5 ± 0,05 g/cm3
• Dry to touch: (23ºC) 3 - 4 h depending on the thickness applied
• Consumption: 0.12 L/m2 varying according to the porosity of the substrate