Primer for non-absorbent surfaces Smart Primer Grip 2Kg.

Data sheet

See Smart Primer Grip Technical Data Sheet

Benefits of Smart Primer Grip Non-Absorbent Primer 2Kg

• Smart Primer Grip Primer for non-absorbent surfaces creates a rough surface for excellent adhesion on smooth or low absorption substrates for the application of microcement, plaster, tile installation on concrete, ceramic, hydraulic tile, etc.
• Ready-to-use primer composition for non-absorbent surfaces for easier and faster application.
• Non-absorbent primer can be applied by brush or roller in a single pass to save time and product.
• Smart Primer Grip non-absorbent primer is suitable for indoor and outdoor application, an all-purpose adhesion promoter.

Application of primer on non-absorbent surfaces Smart Primer Grip 2Kg

1. Before applying Smart Primer Grip non-absorbent surfaces, the substrate must be dry, clean, firm and free of grease or oil.
2. Shake the container or stir with a spatula and apply with a brush or roller a coat of Smart Primer Grip primer for non-absorbent surfaces on the material to be coated.
3. Wait between 2 and 4 hours for the Smart Primer Grip primer for non-absorbent surfaces to dry properly before applying the microcement.

Additional information about Smart Primer Grip 2Kg non-absorbent primer.

All additional technical information about Smart Primer Grip primer for non-absorbent surfaces and its application:

• Polymer type: Acrylic
• Appearance: Milky granular liquid
• pH: Between 7,5 and 9
• Bulk density: 1,5 ± 0,05 g/cm3
• Dry to touch: (23ºC) 3 - 4 h depending on the thickness applied
• Consumption: 0.12 L/m2 varying according to the porosity of the substrate