Smart Wax: maintenance wax for microcement

Smart Wax description: microcement wax

Smart Wax is a microcement wax formulated for surfaces already protected with sealer. Its purpose is to help keep the finish in good condition, providing a surface care layer that improves the appearance of the coating and makes regular maintenance easier.

Unlike varnish, which acts as the main sealer of the system, Smart Wax does not replace that initial protection, but complements it. Applied over previously protected surfaces, it helps extend the service life of the coating by adding an extra layer that improves both its appearance and its behavior against wear, while also helping maintain the surface hardness and natural shine of the microcement.

This maintenance wax for microcement is especially recommended for floors, where foot traffic, frequent cleaning, and rubbing can affect the appearance of the finish over time. It can also be used on walls when you want to keep the surface more cared for and uniform.

Its use is especially recommended in high-traffic areas or spaces exposed to moisture, such as bathrooms and kitchens, where microcement requires more regular maintenance to preserve its properties.

Thanks to its liquid format, Smart Wax can be applied manually with a sponge or mop, or by machine on larger surfaces. This maintenance should be repeated periodically to preserve the appearance and functionality of the microcement. Depending on use and wear, it will need to be applied more or less frequently.

Benefits of Smart Wax microcement wax

• Adds a long-lasting, natural shine to microcement floors and walls.
• Improves the surface hardness of the coating.
• Makes periodic microcement maintenance easier.
• Easy-to-apply product.
• Can be applied both manually and by machine.
• Very effective in low doses.
  

Technical data of Smart Wax maintenance wax for microcement

• Color: White
• Nature: Made from natural waxes and additives
• Density: 1.01 ± 0.005 g/mL
• Ford Cup 4 viscosity: 10.22 s
• Solids: 2.25%
• pH: 6.5–7.5
• Coverage (manual application): 0.25 mL/m²

How to apply Smart Wax microcement wax

Before applying Smart Wax microcement wax, make sure the surface is clean, dry, and free from dust or residue. For best results, clean it first with a product such as Smart Cleaner and wait until the surface is completely dry.

Dilute the wax according to the application method

Smart Wax microcement wax can be applied manually with a sponge, mop, or floor mop, or by machine on larger surfaces.

• For manual application, dilute 20–25 mL in 7 liters of water.
  For machine application, dilute 20–100 mL in 10 liters of water.

Apply a thin, even coat of wax

Apply a thin, even coat over the surface, avoiding excess product. On floors or larger areas, it is best to work in sections to spread the microcement wax evenly and avoid buildup or differences in shine.

For small or hard-to-reach areas, such as corners, edges, or joints between walls and floors, you can use a sponge or microfiber cloth for more precise application.

Allow it to dry properly

After application, it is important to respect the drying time of the microcement wax, which is usually between 12 and 24 hours, depending on environmental conditions.

Before applying Smart Wax microcement wax for the first time, wait at least two weeks after applying Smart Varnish to ensure the varnish has cured properly and to avoid damaging the microcement finish.

Signs that it is time to reapply microcement wax

To keep microcement surfaces in good condition, check the finish over time. Wax helps preserve shine, surface hardness, and the well-cared-for appearance of the coating, but it should be reapplied periodically to maintain its effectiveness.

Some signs may indicate that it is time to renew the wax application:

• Loss of shine: if the surface starts to look dull, the wax layer may have worn down and need a new application.
• Visible marks: small scratches, scuffs, or signs of wear may indicate that the surface needs additional maintenance.
• Greater sensitivity to stains: if splashes of water or other liquids leave marks that are harder to clean, applying a new coat of wax may be recommended.

Frequently asked questions about microcement wax

How often should microcement wax be applied?

Frequency will depend on the use and type of surface. As a general guideline, wax should be applied every 6 to 12 months, especially on floors or high-traffic areas.

Can wax be applied to microcement walls?

Yes. Although it is more commonly used on floors, it can also be applied to walls to help keep the finish in good condition and make cleaning easier.

Does microcement wax replace sealer?

No. Wax is a maintenance product that complements the protection provided by mcirocement sealer, but it does not replace it. Varnish is responsible for sealing and protecting the surface.

How can you restore the shine of microcement?

By applying a new coat of microcement wax. If the surface has lost shine with use, proper application can help restore its original appearance.

Data sheets

Specification sheet Smart Wax