Ready-to-use water-based polyurethane varnish matt or satin Smart Varnish Smartcret

Ready-to-use water-based polyurethane varnish Smart Varnish 2L and 5L (matte or satin)

67.34 € VAT included

After applying the microcement it is time to protect it as it deserves. And there is no better varnish than Smart Varnish.

Ready-to-use water-based polyurethane varnish Smart Varnish is quick-drying and easy to apply and enhances the color of the coatings.

You will only have to choose between a matte or satin finish of Smart Varnish ready-to-use water-based polyurethane varnish.

Finish:
Packaging:
Quantity:

Description Smart Varnish ready-to-use water-based polyurethane varnish (matte or satin)

The ready-to-use water-based polyurethane varnish Smart Varnish is a product specially indicated for the correct protection of ready to use microcement with a matte or satin finish.

Thanks to its abrasion resistance of Smart Varnish ready-to-use water-based polyurethane varnish, there is no problem with household cleaning agents. At the same time, Smart Varnish ready-to-use water-based polyurethane varnish protects microcement surfaces from weathering and sunlight (no yellowing).

Smart Varnish ready-to-use water-based polyurethane varnish protects microcement both indoors and outdoors.

It is easy to apply thanks to its ready-to-use composition, without the need for dilution, by brush or roller. Once the Smart Varnish ready-to-use water-based polyurethane varnish has been applied, the color of microcement coatings is significantly enhanced.

Smart Varnish ready-to-use water-based polyurethane varnish is available in 2L and 5L packaging.

Benefits of Smart Varnish ready-to-use water-based polyurethane varnish (matte or satin)

  • Abrasion resistance.
  • Good resistance to occasional water exposure.
  • Unaffected by UV light (does not yellow).
  • Quick-drying and easy-to-apply ready-to-use water-based polyurethane varnish.
  • Enhances the color of ready-to-use microcement.
  • Good resistance to household cleaning agents.

Additional information Smart Varnish ready-to-use water-based polyurethane varnish (matt or satin)

All the additional technical information about Smart Varnish 2L ready-to-use water-based polyurethane varnish with matt or satin finish and its application:

  • Color: Transparent (in dry film)
  • Gloss: Satin or matte
  • Density: 1,03 ± 0,01g/cm3
  • Viscosity in Ford Cup 4mm: 35 ± 10 s
  • Minimum application temperature: 8°C
  • Dry to touch: 1 - 2 h
  • Recoating: 4 h
  • Drying: 24 h
  • Curing time: 7 days

Application of ready-to-use water-based polyurethane varnish Smart Varnish (matt or satin)

  1. 1. After 24 hours from the application of the last coat of Smart Varnish, check that the substrate is dry and free of dust. Allow 24 to 48 hours before applying Smart Varnish ready-to-use water-based polyurethane varnish. If it is applied on old varnish, it will be necessary to sand the surface well and remove stains, grease, dust, badly adhered product, etc.
  2. 2. Apply 3 coats of Smart Varnish's ready-to-use water-based polyurethane varnish with a brush or roller on the same day. Allow 4 hours of drying time between coats. For increased protection, you can apply 4 coats in wet or high-traffic areas.
  3. 3. Let dry 24 hours and for a complete cure wait 7 days from the application of Smart Varnish ready-to-use water-based polyurethane varnish.

Products related to Smart Varnish