Before you buy

Check if this kit is right for your bathroom

This solution is designed to renovate tables made of wood, chipboard or MDF without replacing them. Check these four points before choosing size and colour.

Compatible surface

Tables and boards made of wood, chipboard or MDF. This is not the right kit for walls or floors: choose the kit for the surface you want to renovate.

Coverage

Measure the height × width of each surface. The calculator adds a 10% margin and recommends the right kit size, or a combination for larger projects.

What's included

Joint filler, primer, microcement base coats, finish, varnish, additive and sandpaper: the complete layer-by-layer system.

What you need separately

Sealer roller, polycarbonate trowel and basic tools. You can find them in microcement tools.

FREE shipping included in the price. Delivery times depend on your country; you will see the estimate at checkout.

Step-by-Step Guide

Everything you need to know before you start

What’s included and what do I need separately?

The kit includes all the Smartcret system products needed for your surface and your square metres: you will find them detailed one by one, with their quantities, in the ‘Description’ tab below. You will also need a sealer roller, a polycarbonate trowel and basic protection and application tools. The microcement comes ready to use, already pigmented; only the final coat of varnish is mixed with its booster.

How do I choose the coverage?

Measure the surface to be covered: for walls, width × height of each section; for floors, worktops or furniture, length × width of each face. Subtract only large openings, add up the total and add a 10% margin. Choose the kit whose m² is equal to or greater than the result; if in doubt between two, go for the larger one. You can also use the calculator in the selector.

How long does the project take?

The full project takes 3 days. The varnish reaches full cure from 7 days.

Can I return or exchange the kit?

Yes: you have 14 days from delivery for exchanges and returns. Return shipping is at the customer’s expense and your order number is enough for us. See the full conditions.

Is it right for my surface?

Each kit is formulated for a specific project and surface: you will find it in the kit name and in the line with ✓ above the coverage selector. If your surface is different (for example, plasterboard instead of tiles), use the assistant at the top and we will take you to the right kit. First repair any loose piece, active crack or damp problem.

Description

Everything you need to turn an ordinary table into the table with our 6 m² microcement kit for tables

You’ve been obsessing for weeks over those dreamy microcement tables all over social media and in the most stylish interior design magazines. But then comes the buzzkill: the price tags. And just like that, your dream stays a dream.

Not anymore. With our 6 m² microcement table kit, you’ll stop daydreaming and start creating. By yourself. Quickly, easily and—finally—without breaking the bank.

This ready-to-use kit has everything you need to turn a basic table into a one-of-a-kind piece. A continuous surface, seamless finish, soft texture and calm, elegant vibe that fits perfectly into the most minimalist or design-forward interiors.

This microcement kit is packed with 100% professional-grade products, specially designed to transform tables made of wood, chipboard, MDF or similar materials into true icons of interior design. Because exclusive pieces aren’t always bought… sometimes, they’re made.

- 1 unit of Smart Primer ABS (1 L): water-based acrylic primer. Its main job is to improve adhesion between the surface and the microcement, while evening out absorption across the entire table.

- 1 unit of Smart Liso (6 Kg): ready-to-use finishing microcement, pre-pigmented in your chosen color. Its finely grained texture creates a smooth, silky, touchable surface.

- 1 unit of Smart Varnish (2 L): water-based polyurethane varnish. Ready to use, it seals and protects the microcement against wear, moisture and daily life. Bonus: it enhances the color of your surface. Available in matte and satin.

- Sanding discs included: the perfect grit for your project. 6 units of 220-grit and 3 units of 400-grit for that flawless finish.

*Important: want the full Smartcret experience? We’ve got a complete tools kit (sold separately) with everything you’ll need: rollers, tray, protective tape, sanding glove and our anti-burn polycarbonate trowel—essential for a top-notch result.

Application

How to apply the 6 m² microcement table kit (no drama, no mystery)

Turning a dull table into a stunning microcement showpiece isn’t an epic quest—if you know where to start. With this step-by-step guide, you’ll transform any boring surface into the kind of table you’ll proudly show off to every guest. Let’s get to it!

1. Clean your table like guests are coming

Before diving in, make sure the surface is in perfect condition. Clean it thoroughly and remove any traces of grease or dirt. Once dry, it’s time to prime.

2. Priming made easy

Apply one coat of Smart Primer ABS using a roller. This water-based primer is key for helping the microcement stick properly to your table. Let it dry for about 30 minutes. Easy peasy.

3. Three layers of microcement: let the magic begin!

Stir Smart Liso well and apply a thin first layer (<0.5 mm) using the Smart Roller. Smooth it out with the trowel using gentle strokes at a 45° angle. Let it dry for 6 hours and sand with 220 grit. Repeat the process until you’ve applied 3 layers in total. Once done, let the surface rest for 24 hours before varnishing.

4. Varnish it and show off your masterpiece!

Apply 3 coats of Smart Varnish, allowing 4 hours of drying time between each one. Sand the first and second coats with 400 grit. Keep in mind: the varnish mixture stays usable for 24 h, so stay on schedule. After 7 days, your table will be fully protected, beautifully finished and ready for anything (coffee mugs included!) thanks to the protective sealer for microcement.

Smartcret tip: always hold the trowel at a 45° angle. Don’t use an electric sander—it could burn the microcement. The sanding papers in the kit are for manual use, and our anti-burn trowel from the tools kit is your best ally for a smooth, worry-free finish.

Download the guide

Technical data sheets

Technical data sheets for the 6 m² microcement kit for tables

You like to know exactly what you're working with. Before you get started, check out the technical data sheets for each product included in the 6 m² microcement kit for tables:

Specification sheet Smart Primer ABS

Specification sheet Smart Liso

Specification sheet Smart Varnish

Success stories: how our customers rate Smartcret

4.6/5 ★ (65 reviews on Google)

Christopher Berumen

My wife and I had been looking into microcement for our bathrooms and found Smartcret. Being from the US we worried about importing, but our kits arrived within a couple of weeks. We DIY'd with a contractor friend and LOVE how it came out — smooth, waterproof, and the colours match the catalogue perfectly. If you're in North America, watch for sales to offset shipping costs!

★ ★ ★ ★ ★

Marcus Sprigens

The solution for revamping a tiled bathroom is Smartcret. Amazing product, very high quality with a smooth to touch finish, a pleasure to walk on in bare feet. No mixing powder and liquid as it comes ready to apply. Super happy with the results and great customer service.

★ ★ ★ ★ ★

Dee Moe

We used Smartcret for our bathroom walls and it turned out amazing. It was a long process but the steps were easy enough to follow. They were very supportive on WhatsApp and were there every step of the way.

★ ★ ★ ★ ☆

Nicole Lyons

I found this product because I was so sick of cleaning tile grout. I wanted the Tadelakt look without spending $$$. The process takes time but the result was worth it. Only use the plastic trowel — a metal one leaves black marks. The Smartcret team was very helpful. I love my new shower and get so many compliments on it!

★ ★ ★ ★ ★

Smadar Levi

I had an amazing experience with Smartcret, absolutely amazing for beginners like me. I changed the floor in a beautiful small cabin and the change was incredible. The service was wonderful. Highly recommend!

★ ★ ★ ★ ★

Tarek Hijazi

We are so happy with Smartcret and the finish! It has given our bathroom a luxurious feel. We have already recommended it to 5 people. Thank you!

★ ★ ★ ★ ★

Elan Argil

Great renovation option if you don't want to demo the tile — it sticks to anything. The company is responsive with great customer service.

★ ★ ★ ★ ★

Neil Henderson

First time user of this product. It's so easy to use and looks really good. Lots of colours to choose from. Great customer service as well.

★ ★ ★ ★ ★

Jade Savage

I live in the US and ordered from Smartcret. My order arrived within a couple of weeks and the customer service is out of this world! I had an item arrive damaged and they were fast to ship a replacement. Great communication. I'll be doing our shower soon!

★ ★ ★ ★ ★

Franny Zywicki

We used it in our Hostal for all the bathrooms and floors. We absolutely loved the product — so much quicker as a ready mixed product. Really helpful team. The only tip: use a stronger varnish on your wettest areas.

★ ★ ★ ★ ☆

Microcement kit for tables for 6m2

Microcement kit for tables for 6m2