Add up width × height of every surface you are going to cover.
Couldn't load pickup availability
Includes Smart Base, Smart Liso, Smart Varnish and Smart Primer ABS, sanding discs and instructions · Free shipping, delivery time shown at checkout · 14-day returns
What arrives at your home5 products · 31.9 kg
That is 31.9 kg and the carrier leaves it at the street door, not inside your home. Have someone to help you carry it up.
Product
Qty
Format
Smart Base
1 ×
16 kg
Smart Liso
1 ×
6 kg
Smart Varnish
1 ×
2 L
Sanding discs
20 ×
g40 · g220 · g400
Smart Primer ABS
1 ×
1 L
Tools are sold separately — trowel, roller and bucket.
See them →
✓ FREE shipping. Delivery times depend on your country; you will see the estimate at checkout.
One kit to cover dry interior walls (living room, bedroom, corridor) over plasterboard, plaster, cement or tile, without ripping anything out. Choose the surface, the size and the colour; the kit arrives complete, with instructions. For the bathroom and the kitchen there are kits of their own.
Colour: swatches and NCS equivalences are indicative. The actual result may vary depending on your screen, the lighting of the space, the surface and the application.
The kit includes every product of the Smartcret system your surface and square metres need: primer, Smart Base, the finishing microcement (Smart Liso for walls and furniture, Smart Medio for floors), the Smart Varnish sealer and the sanding discs, with step-by-step instructions. You have them listed one by one, with quantities, in the “What arrives at your home” block, below the buy button, which changes with the metres and the surface you choose. Tools (trowel, roller, tray and sanding glove) are sold separately: you have them all in the Smart Tools tool kit. The microcement comes ready to use and pigmented; in the bathroom, kitchen, floor, outdoor and furniture kits the varnish is mixed with Smart Booster, which is included; for walls and fireplaces the varnish is used on its own.
Which m² kit do I need?
Measure the surface to be covered: for walls, width × height of each section; for floors, worktops or furniture, length × width of each face. Subtract only large openings and add up the total. Choose the kit whose m² is equal to or greater than that total; if in doubt between two, go for the larger one. The “Work it out here” link, below the Metres option, does it for you.
Can I return or exchange the kit?
Yes: you have 14 days from delivery for exchanges and returns. Return shipping is at the customer’s expense and your order number is enough for us. See the full conditions.
Is it right for my surface?
Each kit is formulated for a specific project and surface: you will find it in the kit name and in the “Surface” option of the selector. If your surface is different (for example, plasterboard instead of tiles), choose it in the selector and the kit adjusts. If your project is another room, you have all eight kits in the kit collection. First repair any loose piece, active crack or damp problem.
Description
What it is
Microcement to cover the walls you already have, with no demolition and no building work.
It goes on top of the existing surface in a thin layer, so there is no demolition and no rubble. You choose the surface you have and the kit adapts to it.
Twenty colours, all with a matt finish. The kit arrives complete and with step-by-step instructions.
What arrives. Primer (Smart Primer ABS or, on tile, Smart Jointer and Smart Primer PLUS), Smart Base, Smart Liso, Smart Varnish, 40, 220 and 400 grit sanding discs and step-by-step instructions. The tools (trowel, roller and tray) are sold separately, in the Smart Tools kit.
Coverage. Each size in the dropdown covers the area stated in its name, counting the two coats of Smart Base and the two of Smart Liso.
Storage. Keep unopened containers somewhere cool and frost-free.
Where it does not go. On bathroom walls (including the shower) or on the kitchen splashback: for those areas there are the bathroom and kitchen kits, with the varnish reinforced with Smart Booster.
It is material, not a panel. You apply it; it is not glued or screwed on.
Properties
Properties
Seamless and continuous. Applied in a thin layer over the existing surface, so it does not noticeably raise the level.
Twenty colours. All with a matt finish, which comes from the varnish included in the kit.
Ready-to-use. The microcement comes pre-mixed: no measuring out or mixing aggregates.
Adhesion without ripping anything out. The primer is what lets you apply it over what is already there, without tearing anything off or preparing the surface with building work.
Cleans with water and mild soap. No abrasive products or metal scourers, which scratch the varnish.
Uses
Uses
Living room walls
Entrance hall and corridor
Bedroom and study
A single feature wall
Plasterboard or plaster partition walls, and tiled walls outside the bathroom and the kitchen
Application
How to apply it
It goes on top of what you already have, with no ripping out and no rubble. The kit includes all the products and step-by-step instructions; the tools (trowel, roller and tray) are sold separately. There are four products, always in this order:
Preparation. On plasterboard, plaster, cement or concrete the surface is porous and there are no grout lines to fill: apply Smart Primer ABS, the primer for absorbent surfaces, and after 30 minutes you can carry on. On tile the surface does not absorb: first fill and level the grout lines with Smart Jointer (12-24 hours of drying) and then apply Smart Primer PLUS, the maximum-adhesion primer (30 minutes).
Smart Base, two coats. This is the preparation layer: it is applied with a trowel in a thin layer (less than 1 mm per coat), left to dry for 6 hours between coats and sanded with the 40 grit disc. It is what gives the coating body and what makes Smart Liso grip.
Smart Liso, two coats. This is the finish: a very thin layer (less than 0.5 mm per coat), 6 hours of drying between coats and sanding with the 220 grit disc. The second coat is the one that sets the final look. The whole build-up comes to around 2-3 mm thick.
Smart Varnish, three coats. it is applied 24 hours after the last coat of Smart Liso: three coats with a roller, 4 hours between them, sanding the first two with the 400 grit disc. The varnish is what protects and what gives the matt finish; you apply every coat, without skipping any.
Putting it to use. The wall can be touched and decorated the day after the last coat of varnish; maximum resistance comes after 7 days.
No previous experience is needed. The total time depends on the surface area and on the drying times between coats: the application takes three days and the varnish reaches full cure after seven.
Technical data sheets
Technical data sheets for the products in the kit
These are the technical data sheets for every product in the kit. Which ones you receive depends on the surface you choose.
