Microcement Kit 48 m² · floors · tile

What the Microcement Kit 48 m² · floors · tile contains

This kit covers up to 48 m² of floor with visible grout lines and allows large areas to be renewed with no building work and no rubble.

It is applied over the existing floor, without removing the previous surface and with no dust and no rubble. It is intended for glazed surfaces: terrazzo, marble, stone slab, tile, mosaic tile, stoneware or porcelain.

It is a layered system that levels the grout lines and turns the floor into a continuous surface, with more grip underfoot and resistant to the daily wear of rooms such as the living room, the bedroom, the playroom or the study.

You can apply it yourself with the right tools, which are not included in the kit but can be added to the basket from our shop. These are the products you will find in the kit:

• 6 x Smart Jointer (1,5 Kg): for filling and levelling the grout lines, leaving the surface smooth and prepared.
• 6 x Smart Primer PLUS (1 L): maximum-adhesion primer for glazed surfaces such as terrazzo, marble, mosaic tile, porcelain, tile or stone slab.
• 6 x Smart Base (16 Kg): preparation microcement, already pigmented. It evens out the surface.
• 3 x Smart Medio (16 Kg): finishing microcement, ready to use and pigmented. It provides the final texture, with more grip and resistant to heavy traffic.
• 2 x Smart Varnish (5 L): water-based varnish, matt or satin, that protects against damp, stains and heavy use. It is also the product that seals the colour.
• 2 x Smart Booster (250 gr): component B that reinforces the chemical and mechanical resistance of the varnish.
• 36 x Grit 40 discs: for sanding Smart Jointer and Smart Base.
• 60 x Grit 80 discs: for smoothing Smart Medio.
• 36 x Grit 400 discs: for softening the first varnish layers.

Key aspects to renovate your floor like a professional

Good planning is what makes the difference between a good result and an excellent one. So before you get started on your no-build renovation, pay attention to these tips. They will help ensure that renovating your floor with the microcement kit for jointed floors up to 48 m² gives you a flawless finish.

🧱 Is the substrate in good condition?

• The first step towards a successful result is having a solid base. Check the condition of your tiled floor carefully before applying microcement.
• Are there any cracks, fissures, chips or loose tiles? Repair them before applying the ready-to-use system. If you do not, the microcement will replicate any existing damage and the result will not be what you expect.

👣 Drying, curing and when you can walk on the floor

The larger the project, the more patient you need to be:

• The Smart Varnish + Smart Booster mix has a pot life of 24 hours. After that time, it must be discarded.
• After applying the varnish, avoid walking on the floor for at least 48 to 72 hours.
• The full curing time of the floor is 7 complete days. After that, it can be used as normal.

Important: even if the floor feels dry to the touch, the varnish is still curing internally, so it is essential to respect these times in order for it to reach its maximum performance.

🪑 Be careful when dragging furniture and chairs

Your floor is designed to withstand everyday use, but taking a few simple steps to protect it and extend its lifespan is always a good idea.

• Do not drag furniture directly across your microcement floor.
• Place protectors on the legs of chairs, stools, sofas, armchairs and similar furniture.

🧽 Cleaning and maintenance during the first few days

It is important not to mop the floor or apply cleaning products during the first 7 days. The microcement is still curing, so it is best to leave it undisturbed. After that, cleaning and maintaining your microcement floor is very simple:

• Clean with water and pH-neutral soap.
• Do not use bleach, ammonia, abrasive products, scouring pads or metal brushes, as they may damage the finish.
• Dry up water and liquid spills as soon as possible. Occasional contact with water or liquids is not a problem, but constant exposure is.

🪶 Thin coats and light sanding: delicacy matters on large surfaces

Even though it is a large surface and you may be tempted to apply more product and work more intensively, the key is to take it slowly:

• Apply thin coats. Follow the interactive application guide and always work with thin layers.
• Respect the drying times between coats. This is essential for an excellent result.
• Sand with the correct grit for each product, and do so gently to achieve an even finish.
• Keep the trowel at a 45° angle. This will help ensure a uniform result.

A careful application makes all the difference to the final finish.

⚒️ The right tools for an optimal result

The tools used during the microcement application have a major impact on the final result. Using untested tools can burn the microcement and completely ruin the finish of the coating.

You can purchase the Smartcret tool kit in our store.

🎯 Result

By following these recommendations, your microcement floor will keep looking like new for much longer.

Properties of the microcement kit for terrazzo or tile floors up to 48 m²

• Ready to use: so you can forget about mixing, tinting or calculating quantities. Simply open the container and start renovating your jointed floor.
• Layer-by-layer application: the system works in synergy to level the joints, stabilise the base and achieve an even, durable finish.
• Water-based formula and low emissions: as it contains no toxic components in its formulation, it is safer for you, your home and your pet, more environmentally friendly and more pleasant to apply.
• Direct application over the existing floor: it is applied directly over the tiled floor, avoiding building work and everything that comes with it.
• Complete DIY renovation: perfect for renovating up to 48 m² in just a few days and without hiring labour.

What spaces is this microcement kit for jointed floors up to 48 m² recommended for?

It is recommended for any large indoor floor made of a non-absorbent material such as terrazzo, marble, stoneware, porcelain or tiles with visible joints.

Which indoor floors does it work particularly well on?

• Large living rooms and dining rooms.
• Spacious offices and professional workspaces.
• Entrance halls and long hallways.
• Multi-purpose rooms.
• Libraries.

Thanks to its performance, it is ideal for high-traffic areas where an aesthetic renovation is needed without carrying out building work.

What about the bathroom? You can also apply it in this room if you are looking for a more textured finish than Smart Liso, our specific system for bathroom floors. In both cases, you will get a smooth, seamless surface that is perfect for keeping up with the rhythm of everyday footsteps.

How to apply the microcement kit for terrazo or tile floors up to 48 m² (without it turning into an ordeal)

If you are renovating a 48 m² floor, the key is to take your time and work carefully. Rushing is never a good idea. You need to apply the product evenly, in thin coats, respecting the drying times and using the right tools for each step. The pace of the playlist is up to you:

1. Clean and prepare the floor

• Sweep or vacuum the floor and then mop it to remove any existing dust or dirt.
• An optimal substrate is your best ally if you want the best possible result. Check that the tiled surface is in perfect condition. If not, now is the time to repair it.

2. Smart Jointer: goodbye to the joints

• Filling the joints is the first step towards a seamless and even floor.
• Let it dry for 24 hours.
• Sand with 40-grit sandpaper and remove any residual dust.

3. Smart Primer PLUS: connect the substrate and the microcement

• Apply the primer with a roller.
• Let it dry for 30 minutes.

4. Smart Base: level the surface

• Apply a thin coat with the Smart Roller and smooth it with the trowel at a 45° angle.
• Let it dry for 6 hours.
• Sand manually with 40-grit sandpaper.
• Repeat with one more coat.

5. Smart Medio: the character your floor needs

• Apply a thin coat with the Smart Roller and finish spreading it with the trowel.
• Let it dry for 6 hours.
• Sand with 80-grit sandpaper.
• Repeat the same process with a second and final coat.

6. Varnish + Booster: long-lasting protection and sealing

• Mix both products and shake well.
• Apply a total of 3 coats with a roller.
• Let each coat dry for 4 hours.
• Sand lightly after the first and second coats.

7. Curing: where patience becomes your greatest virtue

• It may feel dry to the touch after the first 48 to 72 hours, but it reaches maximum resistance after 7 days of curing.
• Do not wear high heels during those days and do not drag furniture or other objects across the floor either.

Do it with the DIY guide!

Technical data sheets for the microcement kit for jointed floors up to 48 m²

In addition to a stunning floor, we want you to have all the technical information at your fingertips. Each of the products included in the microcement kit has its own technical data sheet, clearly detailing its application and performance. You can take a look at them below:

Specification sheet Smart Jointer

Specification sheet Smart Primer Plus

Specification sheet Smart Base

Specification sheet Smart Medio

Specification sheet Smart Varnish