Mini Microcement Kit for Walls - Covers 6 m²

Mini Microcement Kit for Walls Content - Covers 6 m²

In the ready-to-use Mini Microcement Kit for Walls, you'll find everything you need to renovate those walls that need some care.

Also, since it's a ready-to-use DIY coating, you won't need to get a permit or hire anyone, making the entire process easier and faster from start to finish. No experience? No problem, you'll see how easy it is to make a big change in those small areas with these products!

The Mini Microcement Kit that covers up to 6 m² of walls contains:

• 1 Smart Primer ABS 1 L: Water-based acrylic primer. This product is designed to improve the adhesion between the substrate and the microcement, ensuring even absorption across the entire surface.
• 1 Smart Liso 6 kg: Ready-to-use microcement. This pigmented product has a fine granule size and is responsible for providing the uniform, smooth, and soft aesthetics of the microcement.
• 1 Smart Varnish 1 L: Water-based polyurethane varnish. Ready-to-use, it seals and protects the microcement from traffic, water, etc. It also enhances the color of the coating. Available in matte and satin finishes.
• Sanding discs: You'll find six 220-grit sandpapers, and three 400-grit sandpapers.

Please note that Smartcret offers a separate toolkit for applying microcement, which is not included in this ready-to-use microcement Mini Kit but is necessary for correctly applying the products. These tools include rollers, a tray, protective masking tape, and a polycarbonate trowel.

Application of the Mini Microcement Kit for Walls - Covers 6 m²

1. Ensure the area is free from cracks, dents, or similar imperfections. Once checked and/or repaired if necessary, make sure it is clean and grease-free. When completely dry, it is advisable to mark the boundaries of the area to be treated with masking tape.
2. Prepare the surface for treatment. Use a roller to apply a layer of Smart Primer ABS, making sure to shake the product before use. Let it dry for 30 minutes.
3. Application of microcement. Spread a thin layer of Smart Liso (less than 0.5 mm) over the entire surface with the Smart Roller, starting vertically first and then horizontally. Next, use the trowel at a 45º angle to smooth the surface with arcing movements in various directions until it is completely smooth. Allow each layer to dry for at least 6 hours and sand with 220-grit sandpaper after each layer has dried. Apply a total of 3 layers of Smart Liso. Finally, carefully remove the masking tape and we recommend letting the surface rest for 24 hours after the last application for best results.
4. Reapply the masking tape and apply 3 layers of Smart Varnish with a roller. Remove the masking tape immediately after application or after it is completely dry. Allow 4 hours of drying time between layers. Sand the first and second layers with 400 grit sandpaper. Finally, to ensure perfect curing, let it dry for 7 days.

*Important: to apply Smartcret microcement correctly, the trowel must be kept at a 45º angle. If not, the final finish may differ from the desired result. It may also be affected if a trowel other than the one included in our tool kit is purchased. For a proper application process, we recommend manual sanding only. The sandpaper grits are designed for this purpose. Using an electric sander carries the risk of generating excessive friction and burning the microcement.

Technical Data Sheets for Mini Microcement Kit for Walls - Covers 6 m²

Do you want to know more about all the products included in the Mini Microcement Kit for walls that covers 6 m²? Here are the technical data sheets for each of them:

Specification sheet Smart Liso

Specification sheet Smart Primer ABS

Specification sheet Smart Varnish